(1)Remove the four cup S M3x6 Taptite screws, four cup B M4x12 Taptite screws and screw pan (S/P washer) M4x8.
(2)Remove the cup S M4x8 Taptite screw and screw pan (S/P washer) M4x8, and then remove the Side plate R ASSY from the Frame unit.
<A view>
Frame unit
Screw pan (S/P washer) M4x8 DB
Taptite, cup S M3x6
“A”
Taptite, cup S M4x8
Taptite, cup S M3x6
|
| Screw pan (S/P washer) |
|
| M4x8 DB |
|
| Taptite, cup B M4x12 |
|
| (Tightening torque: 0.90 ±0.1 N m) *1 |
|
| Taptite, cup S M3x6 |
| Taptite, cup B M4x12 | |
Side plate R ASSY | (Tightening torque: 0.90 ±0.1 N m) *1 | |
| Taptite, cup S M3x6 | |
| Taptite, cup B M4x12 | <Right side> |
| (Tightening torque: 0.90 ±0.1 N m) *1 | |
Fig.
*1 Tightening Note:
When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the screw) with your hand until you feel that the screw is a little dropped in the hole. Then, slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten it according to the specified torque with a screwdriver.
Confidential |