2.OTHER SERVICE FUNCTIONS
2.1Resetting the Periodical Replacement Parts Life
2.1.1Resetting the Life Counter of the Belt Unit <Function>
This function allows you to reset the page counter of the belt unit and increase the number of replacement times by one.
<Operating Procedure>
(1)Press the 3 and 9 buttons at the same time in the ready state. The “Reset Menu” will appear on the LCD.
(2)Press the 
button a few times to select “Belt unit”.
(3)Press the OK button.
The “1. Reset 2. Exit” will appear on the LCD.
(4)Press the 1 button when resetting the page counter of the belt unit. Press the 2 button if not resetting.
(5)The “Belt unit / Accepted” will appear on the LCD if pressing the 1 button. The page counter of the belt unit is reset, and the number of replacement times is increased by one. Then, the machine returns to the ready state.
If pressing the 2 button, the machine returns to the Belt unit and you need to press Stop/Exit button to go back to the ready state without performing any operation.
2.1.2Resetting the Life Counter of the Fuser Unit <Function>
This function allows you to reset the page counter of the fuser unit and increase the number of replacement times by one.
<Operating Procedure>
(1)Press the 3 and 9 buttons at the same time in the ready state. The “Reset Menu” will appear on the LCD.
(2)Press the 
button a few times to select “Fuser”.
(3)Press the OK button.
The “1. Reset 2. Exit” will appear on the LCD.
(4)Press the 1 button when resetting the page counter of the fuser unit. Press the 2 button if not resetting.
(5)The “Fuser / Accepted” will appear on the LCD if pressing the 1 button. The page counter of the fuser unit is reset, and the number of replacement times is increased by one. Then, the machine returns to the ready state.
If pressing the 2 button, the machine returns to the Fuser and you need to press Stop/Exit button to go back to the ready state without performing any operation.
Confidential |