8.43Drive Frame Unit ASSY
(1)Remove the three bind B M4x12 Taptite screws, and then remove the Drive frame unit ASSY from the Frame unit.
(2)Disconnect the Connector from the Drive frame unit ASSY.
Frame unit
Drive frame unit ASSY
Connector
Taptite, bind B M4x12 (Tightening torque: 1.20 ±0.1 N m) *1
Drive frame unit ASSY |
|
Taptite, bind B M4x12 | <Left side> |
(Tightening torque: 1.20 ±0.1 N m) *1 |
Fig.
*1 Tightening Note:
When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the screw) with your hand until you feel that the screw is a little dropped in the hole. Then, slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten it according to the specified torque with a screwdriver.
Confidential |