Error code C8Out of Memory
Secure Print Data is full. Press Cancel and delete the previously stored data.
RAM area for secure data full
User Check
- Delete the stored data.
Step | Cause | Remedy |
|
|
|
1 | Main PCB failure | Replace the main PCB ASSY. |
|
|
|
Error code CAUnusable Device
Remove the Device. Turn the power off and back on again.
Excess current to USB device
User Check
-Remove the USB device from the USB direct interface and turn the power off. Turn it on again after a while.
-Replace the USB memory with another one.
Step | Cause | Remedy |
|
|
|
1 | USB host relay PCB failure | Replace the USB host relay PCB ASSY. |
2 | Main PCB failure | Replace the main PCB ASSY. |
|
|
|
Error code CBNo Belt Unit
Open the Front Cover, pull out the Drum Unit completely and install the Belt Unit.
Belt unit is not installed into the machine.
User Check
- Check if the belt unit is installed into the machine.
Step | Cause | Remedy |
1 | Harness connection failure of | Check the harness connection of the density |
| density sensor holder ASSY | sensor holder ASSY and reconnect it. |
2 | Density sensor failure | Replace the density sensor holder ASSY. |
3 | Transfer HVPS PCB unit | Replace the transfer HVPS PCB unit. |
| failure |
|
4 | Engine PCB failure | Replace the engine PCB ASSY. |
Confidential |