| Selector No. | Function |
| Setting and Specifications | ||
|
|
|
|
|
|
|
|
|
|
| No. 1 | 2 |
|
| 1 |
| Min. detection period required | 0 | 0: 1500 ms |
|
|
| for interpreting incoming calling | 0 | 1: 500 ms |
| |
| 2 |
|
| |||
|
| signal (CI) as OFF | 1 | 0: 700 ms |
| |
|
|
|
| |||
|
|
|
| 1 | 1: 900 ms |
|
|
|
|
| No. 3 | 4 |
|
| 3 |
| Max. detection period for | 0 | 0: 6 sec. |
|
|
| incoming calling signal (CI) | 0 | 1: 7 sec. |
| |
| 4 |
|
| |||
|
| being OFF | 1 | 0: 9 sec. |
| |
|
|
|
| |||
|
|
|
| 1 | 1: 11 sec. |
|
|
|
|
|
|
|
|
|
|
|
| No. 5 | 6 |
|
| 5 |
| Min. detection period required | 0 | 0: 800 ms (1000 ms*) | |
|
| for acknowledging incoming | 0 | 1: 200 ms |
| |
| 6 |
|
| |||
|
| calling signal (CI) as ON | 1 | 0: 250 ms |
| |
|
|
|
| |||
|
|
|
| 1 | 1: 150 ms |
|
| 7 |
| Line connection timing | 0: | 1: | |
|
|
| period | period | ||
|
|
|
|
| ||
|
|
|
|
|
|
|
| 8 |
| Not used. |
|
|
|
|
|
|
|
|
|
|
*1000 ms in Chinese models.
-Selectors 1 through 4: Min. detection period required for interpreting incoming calling signal (CI) as OFF
Max. detection period for incoming calling signal (CI) being OFF
If the machine detects the OFF state of a CI signal for the period greater than the value set by selectors 1 and 2 and less than the value set by selectors 3 and 4, it interprets the CI signal as OFF.
-Selectors 5 and 6: Min. detection period required for acknowledging incoming calling signal (CI) as ON
These selectors set the period required to make the machine acknowledge itself to be called. That is, if the machine continuously detects a CI signal with the frequency set by selectors 1 through 4 on WSW14 during the period set by these selectors 5 and 6, then it acknowledges the call.
- Selector 7: Line connection timing
If a line is connected in a
App. | Confidential |