Assembling Note:
(1)Put the Drive shaft holder into the Shaft of the Frame unit.
(2)Align the Hook and Pin of the Drive shaft holder with the hole on the Paper eject ASSY DX while inclining the Drive shaft holder 10 degrees downwards.
(3)Move the Drive shaft holder to the direction of the arrow 3 to align it with the screw hole of the Paper eject ASSY DX, and secure the Drive shaft holder with the bind B M3x10 Taptite screw.
Hole
Pin
Hook 1
|
| Paper eject ASSY DX |
|
|
| Hole of screw | Paper eject ASSY DX |
| 2 | 3 | |
| Drive shaft holder | ||
|
| Taptite, bind B M3x10 | |
Drive shaft holder | Shaft of the Frame unit |
| |
Fig.
(1)Remove the two cup S M3x8 Taptite screws, and then remove the Back cover ASSY.
Hook
Taptite, cup S M3x8
Back cover ASSY
Hook |
|
Taptite, cup S M3x8 | <Back side> |
|
Fig.
Confidential |