(2)Remove the three bind B M3x12 Taptite screws and cup B M3x12 Taptite screw, and then remove the Develop press drive L ASSY.
Taptite, bind B M3X12
(Tightening torque: 0.80 ±0.1 N m) *1
Develop press drive L ASSY
Taptite, bind B M3X12
(Tightening torque: 0.80 ±0.1 N m) *1
Taptite, bind B M3X12
(Tightening torque: 0.80 ±0.1 N m) *1
Frame unit
<Left side>
Taptite, cup B M3x12
(Tightening torque: 0.80 ±0.1 N m) *1
Fig.
*1 Tightening Note:
When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the screw) with your hand until you feel that the screw is a little dropped in the hole. Then, slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten it according to the specified torque with a screwdriver.
(3)Remove the bind S M3x6 Taptite screw, and then remove the Develop release motor ASSY from the Develop press drive L ASSY.
Develop press drive L ASSY
Develop release motor ASSY
Taptite, bind S M3x6
Fig.
Confidential |