(5)Assemble the MP lift arm 2 with aligning it with the three Bosses provided on the Front door unit ASSY.
Note:
When assembling the MP lift arm 2, make sure that the shaft of the MP roller holder ASSY is put into the hole on the MP lift arm 2.
| Hole |
Shaft |
|
(MP roller holder ASSY) | MP lift arm 2 |
Bosses |
|
Front door unit ASSY
<Front>
Fig.
(6)Assemble the MP feed frame cover onto the Front door unit ASSY.
(7)Close the Front door unit ASSY.
Hooks
| MP feed frame cover |
Hook | Hook |
|
MP feed frame cover
<Front>
Front door unit ASSY
Fig.
(8)After replacing the MP paper feeding kit, reset the counter. (Refer to “2.3 Parts Life Reset Function” in this chapter.)
Confidential |