CHAPTER 4 ADJUSTMENTS AND UPDATING OF SETTINGS, REQUIRED AFTER PARTS REPLACEMENT
1. IF YOU REPLACE THE MAIN PCB
< What to do when replacing the main PCB >
Rewriting the Firmware (Main Firmware, Sub Firmware (PCL/PS))
EEPROM Parameter Initialization of the Main PCB (Maintenance Mode: Code 01)
Operational Check of Control Panel Button (Maintenance Mode: Code 13)
Operational Check of Sensors (Maintenance Mode: Code 32)
Acquisition of White Level Data and Set the CCD Scanner Area (Maintenance Mode: Code 55)
EEPROM Customizing of the Main PCB (Maintenance Mode: Code 74)
Setting the Serial Number 
Performing the Auto Registration
< Which parts to use >
Main PCB: The table below shows the ROM type.
Main PCB | ROM 0 | (16 Mbyte) | Main Firmware |
(For a spare parts) |
|
| (Controller Program, Network Program) |
|
|
|
|
| ROM 1 | (8 Mbyte) | Sub Firmware (PCL/PS) |
|
|
| (Emulation, Font data) |
< What you need to prepare >
(1) | Computer (Windows XP/2000) |
|
| Create a folder on the C drive, for example:- (AC FIRMWARE) | |
(2) | A USB flash memory drive |
|
(3) | The Firmware |
|
|
|
|
| Main Firmware: | LZXXXX_$.djf |
| LZ1092_A.djf | LZXXXX: First six digits are a parts number of the |
| Sub Firmware (PCL/PS): | firmware. |
| LZ0828_A.djf | $: Alphabet representing the revision of the firmware. |
|
| |
|
|
|
(4)The Maintenance Tool (Mainte.EXE)
Copy it into the folder that has been created on the C drive. Extract the copied file and run “brmainte.exe” file by
(5)A USB cable
(6)The Download Utility (FILEDG32.EXE)
Copy it into the folder that has been created in the C drive.
(7)The Brother Maintenance USB Printer Driver
Copy it into the folder that has been created on the C drive and extract the copied file.
Confidential |