Assembling Note:

When assembling the Paper feed frame unit, make sure to follow the procedure described below.

(1)Put the belt cleaner release sensor harness and belt cleaner release solenoid harness through the hole on the paper feed frame.

(2)Put the two harnesses above and T1 PE/edge sensor harness through the PF CR harness holder and put them out of the hole on the Side frame L.

(3)Hold the PU lift up cam with a Screwdriver or similar and push to the back of the machine . The section “B” shown in Fig. 3-182in the next page can be moved up and down by this operation, which makes it easy to assemble the lift arm.

Side frame L

PU lift up cam

<Front>

Screwdriver

Fig. 3-180

3-131

Confidential