
Overview
Use HP Rack and Power Manager to:
•Customize alerts
—Send
—Send broadcast notification messages
—Send SNMP traps
—Issue computer commands
—Perform device actions
•Monitor, manage, and control UPSs
—Configure redundant UPSs to support servers with multiple power supplies
—Manage a graceful shutdown of attached equipment during utility power failures
—Manage independent UPS load segments to provide separate power control of connected equipment
—Prioritize the timing of equipment shutdowns and reboot connected equipment by load segment
—Shut down and reboot any UPS and attached equipment, based on a
—Delay restart by load segment after a power outage to sequence the startup of system components
—Display UPS logs for analysis
—Monitor the status of UPSs and perform UPS diagnostics
•Monitor, manage, and control CMCs
—Configure and monitor the CMC sensors and options (air temperature, shock/vibration, humidity, intrusion, smoke detection, and front and back door locks)
—Activate relay controls
—Display CMC logs for analysis
—Remotely or locally monitor and control rack environments
—Take action when a negative occurrence is taking place
HP Rack and Power Manager User Guide |