A
Alert Messages
HP Rack and Power Manager enables you to execute a command, send an
CAUTION: For each device action that you set, you must configure the normal, opposite response. For example, if you configure the CMC to turn on a fan when the temperature exceeds normal, you must also configure the CMC to turn off the fan when the temperature returns to normal.
A list of all message texts is provided in Table
Table A-1: Alert Messages
Alert Type | Event Response | Normal, Opposite Response | |
CMC | Aux 1 Alarm | Aux 1 Cleared | |
|
|
| |
CMC | Aux 2 Alarm | Aux 2 Cleared | |
|
|
| |
CMC | Connection Lost to Device | Device Connected | |
|
|
| |
CMC | Device Settings Changed | N/A | |
|
|
| |
CMC | Failed to Connect to Device | Device Connected | |
|
|
| |
CMC | Humidity Above Maximum | Humidity Normal | |
|
|
| |
CMC | Humidity Below Minimum | Humidity Normal | |
|
|
| |
CMC | Input 1 Closed | Input 1 Opened | |
|
|
| |
CMC | Input 2 Closed | Input 2 Opened | |
|
|
| |
CMC | Input 3 Closed | Input 3 Opened | |
|
|
| |
CMC | Input 4 Closed | Input 4 Opened | |
|
|
| |
CMC | Lockset 1 Error | Lockset 1 Normal | |
|
|
| |
CMC | Lockset 1 Failed to Lock | Lockset 1 Normal | |
|
|
|
|
CMC | Lockset 1 | Unlocked | Lockset 1 Locked |
|
|
|
|
CMC | Lockset 2 | Error | Lockset 2 Normal |
|
|
|
|
CMC | Lockset 2 | Failed to Lock | Lockset 2 Normal |
|
|
|
|
CMC | Lockset 2 | Unlocked | Lockset 2 Locked |
continued
HP Rack and Power Manager User Guide |
