Operation
d.Click Get Data to update the graph.
e.Click Refresh to update the graph that is currently
f.Click Exit to close the Graphical Logs box and return to the Logs and Reports screen.
Sensor Setup Screen
The Sensor Setup screen enables you to configure the sensors connected to the CMC.
For each sensor listed, select Available to enable a sensor that is connected to the CMC. If a sensor is not connected and is shown as available, the CMC will erroneously detect an alarm condition and send alerts.
NOTE: For the initial system installation and boot, the CMC automatically recognizes installed sensors and fans.
NOTE: If an installed sensor is to be no longer used, disconnect the sensor from the rear of the CMC, and deselect the Available checkbox on the Sensor Setup screen.
HP Rack and Power Manager User Guide |
