Operation

Version Control Table

For informational purposes, the applicable firmware versions are displayed.

NOTE: Not all UPSs will display the same list of firmware options.

Diagnostics Screen

The UPS Diagnostics screen enables you to perform diagnostic tests on the UPS.

NOTE: A popup message appears to notify you when you try to run tests on a UPS that does not support diagnostics.

To automatically run UPS diagnostics:

1.Enable automatic diagnostic testing by selecting Enable Automatic Diagnostics in the Status box.

2.Schedule automatic diagnostics by selecting 30, 60, 90, or 120 days from the Automatically Execute Diagnostics Every: dropdown box on the Schedule box.

3.Click Apply to accept the information, or click Undo Changes to reject all changes and keep the screen open.

5-38

HP Rack and Power Manager User Guide