Operation
To configure each supported event response:
1.Select the event you want to configure from the Select Event dropdown box.
2.Select the Alert Notifications tab, the Commands tab, or the Device Actions tab.
Alert Notifications Tab
Select the Alert Notifications tab to configure the alert notifications.
NOTE: Before an alert notification can be set up, you must first configure the notification recipients. For information about configuring notification recipients, refer to “Notification Recipients Screen” in Chapter 4.
To add an alert notification:
1. Click Add New Alert Notification. The Add/Edit Notification box appears.
2.Select the type of notification from the Notification Type dropdown box. Available options are email/paging, broadcast, and SNMP traps.
3.Select the group of recipients that should receive the alert notification from the Recipient List dropdown box. Recipient lists are configured on the Notification Recipients screen.
4.Enter the notification delay in the Delay column and select a radio button for either seconds or minutes. The delay is the amount of time that elapses between the occurrence of the event and the sending of the notification.
5.Click Apply to accept the information, click Undo Changes to reject all changes and keep the Add/Edit Notification box open, or click Cancel to return to the Alert Notifications tab.
HP Rack and Power Manager User Guide |