Operation
Version Control Table
The Version Control table lists the hardware, software, firmware, and MIB versions the CMC is currently running. The status column indicates updated versions that are available.
Compare the Version column to the Update Available column. If an update is available, click Update.
Manual Control Screen
The Manual Control screen enables you to control fans and alarm relays and unlock doors while the rack is being accessed (for maintenance, for example).
Only locksets, fans, and alarm relays that are enabled on the Accessory Setup screen display options on the Manual Control screen.
Locksets Box
To manually control locksets, select the appropriate settings for each lockset, and click Apply to accept the information.
•Select Lock to lock the doors.
•Select Timed Unlock for x minutes to unlock the doors for x amount of time.
•Select Unlock to unlock the doors immediately.
•Select Enable CDR to activate the concealed door release. Because HP Rack and Power Manager cannot detect the concealed door release, be sure that this option is not selected for CMCs that control racks without a concealed door release.
NOTE: If the door is unlocked using the concealed door release, the door remains unlocked for the amount of time that is entered in the Timed Unlock entry box for that lockset.
HP Rack and Power Manager User Guide |
