Configuration
3.Schedule automatic discoveries by entering the number of days, hours, or minutes that should elapse between each automatic discovery in the Schedule box.
4.Enter the SNMP Community Strings, separated by commas, that HP Rack and Power Manager should use to discover CMC devices (public is the default string). If you have not changed the default strings on any devices, this step is optional.
NOTE: Community strings are
5.Specify the IP address range or ranges for HP Rack and Power Manager to use in discovery by selecting the checkbox in the Use column next to the range you want to use in the IP Address Ranges table. Only devices and agents within the specified ranges are discovered.
6.Do one of the following:
—Click Apply to accept the information and schedule future automatic discoveries.
—Click Execute Discovery Now to perform an immediate discovery and schedule future automatic discoveries.
—Click Undo Changes to reject all changes and keep the Automatic Discovery screen open.
To edit an IP address range:
1.Click the hyperlink for the IP address range you want to edit in the Description column of the IP Address Ranges table. The Add/Edit IP Range box appears.
2.Edit the information as necessary.
3.Click Apply to accept the information, click Undo Changes to reject all changes and keep the Add/Edit IP Range box open, or click Cancel to return to the Automatic Discovery screen.
HP Rack and Power Manager User Guide |
