Installation
9. Read the information, and click Done.
10.To complete installation of the System Agent, run the following commands from the NetWare server Console:
<INSTALL_PATH>/NWCRPMIN.NCF CRPMLD.NCF
NOTE: The System Shutdown Agent screen appears, indicating that the System Agent has been loaded. In normal operation, this screen might be blank.
11.To complete installation of the Serial Relay Agent:
a.Run the following command from the NetWare server Console:
<INSTALL_PATH>/NWCRPMIN.NCF
The Serial Relay Agent Setup screen appears, allowing for configuration of the Serial Relay Agent. If it is necessary to reconfigure the Serial Relay Agent after the installation, run SRASETUP.NLM from the directory in to which the software was installed (usually SYS:HP/RPM).
HP Rack and Power Manager User Guide |
