Device Overview Screen

The Device Overview screen displays the following information for each UPS:

•UPS name

•UPS location

•IP address

•Current status

•Date/Time stamp

•Active alarms

The information automatically refreshes every 15 seconds.

Current Status Box

The status is presented in graphical format in the Current Status box. Status information includes:

•Input voltage—The voltage level that is supplying power to the UPS.

•Charge percent—The amount of battery charge by percent.

•Battery status—The current state of the battery.

•Estimated runtime—The time in minutes that the UPS will remain on battery.

•Percent load—The percent of the UPS capacity that is being used.

•Output voltage—The voltage level that the UPS is supplying to the load segments.

•Buck—The UPS automatically decreases high input voltage to prevent the UPS from going on battery.

•Boost—The UPS automatically increases low input voltage to prevent the UPS from going on battery.

HP Rack and Power Manager User Guide

5-21