Complete List of Variables | HP Rack and Power Manager Software

Table 2-6: Complete List of Variables

Variable	Function

INSTALLER_UI {should be equal to silent}	Use this variable to indicate the install type.

CHOSEN_INSTALL_SET {agent, SRA,	Use this variable to select which agent
agentSRA}	component to install.
	• Use agent to install the System Agent.
	• Use SRA to install the Serial Relay Agent.
	• Use agentSRA to install both the System
	Agent and Serial Relay Agent.

USER_INSTALL_DIR {Divisions in the file structure between directories should be indicated with the symbol '$/$'.

Example: C:$/$hprpm}

Use this variable to indicate the path to which the agent component is to be installed.

USER_INPUT_CERT_PW_1 {password needed if CHOSEN_INSTALL_SET = agent or CHOSEN_INSTALL_SET = agentSRA; should be equal to USER_INPUT_CERT_PW_2}

Use this variable to input the SSL certificate password that will be generated during the install.

USER_INPUT_SRA_COM {Communications Port Number the UPS is connected to, needed if CHOSEN_INSTALL_SET = SRA or CHOSEN_INSTALL_SET = agentSRA}

Use this variable to input the COM port number to which the UPS is connected.

USER_INPUT_RESULTS_START_1 {this variable is needed to start the services installed; it should be equal to Start RPM Services?}

Use this variable to start the HP Rack and Power Manager service.

INSTALLER_UI = silent

CHOSEN_INSTALL_SET = agent

USER_INSTALL_DIR = c:$\$Program Files$\$HPRPM

USER_INPUT_CERT_PW_1 = Admin

USER_INPUT_RESULTS_START_1 = Start RPM Services?

2-18	HP Rack and Power Manager User Guide