Lucent Technologies 6.0 Identify System Operator Positions G, Lines and Trunks G

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
General System Programming Sequence
PageG-3Identify System Operator Positions
G
Identify System Operator Positions G
■Identify QCC system operator positions.
→ →
■Identify DLC system operator positions.
→ →
Lines and Trunks G
■Specify type of trunk on 400 or 800 GL/LS module.
→
■Identify dial signaling for loop-start/ground-start trunks.
→ →
■Classify disconnect signaling reliability for loop-start trunks.
→ →
■Specify toll prefix requirements.
→
■Specify Hold Disconnect interval.
→More→
■Assign the QCC queue priority.
→More→
■Identify QCC operator to receive calls.
→More→
■Assign trunks to pools.
→