MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-309Optional Group Calling Features
4
Group Calling Repeat Announcem ent 4
Use this procedure to set the secondary announcement to repeat after the
Announcement Interval.
Summary: Group Calling Repeat Announcement 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting No repeat
Valid Entries Yes, No
Inspect No
Copy Option No
Console Procedure →More→ → →Dial
calling group ext. no.→ → →
or → → →
PC Procedure → →→→→Type calling group ext.
no.→ or →→→
Group Coverage Receiver 4
Use this procedure to assign or remove a calling group as a receiver for a
coverage group.
Calling group member assignments must be made before you assign the group as
a receiver for a coverage group.
NOTE:NOTE:NOTE:
Integrated Administration uses calling group 30 as the default group to
cover AUDIX Voice Power.
Summary: Group Coverage Receiver 4
Programmable by System Manager, Integrated Administration
Mode All
Idle Condition Not required
Planning Form Form 7c, Group Coverage
Factory Setting Not applicable