MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-114DS1 Facilities
4
Console/Display Instructions Additional Information PC
Select Suppression.
Select AMI zero code suppression or bipolar 8 zero substitution.
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
Signaling Mode 4
Use this procedure to specify the signaling for the 100D module as robbed-bit or
common-channel signaling.
NOTE:NOTE:NOTE:
This procedure is needed only for T1 facilities; common-channel signaling
is set automatically for PRI facilities.
Summary: Signaling Mode 4
Programmable by System Manager
Mode All
Idle Condition 100D module idle
Planning Form Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
xx
= slot number entered in Step 3
xx
= slot number entered in Step 3
Select or
.