MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming with SPM
Page2-7Installing the SPM Software
2
Installation 2
With Windows 95 running on your PC, follow these steps to in stall SPM on the
PC’s hard drive:
1. Insert a backup copy of SPM in any floppy disk drive (usually the A drive).
2. Choose

one

of the following two methods to install SPM:
Method 1– Install DOS SPM with French, Spanish, or English
Language:
a. Open a DOS Window from Windows Explorer.
b. At the DOS prompt, switch to the drive with the backup copy of SPM
diskette (usually the A drive).
c. At the DOS prompt, type one of the commands shown be low and
press .
■
■
■
NOTE:
Because English is the factory-set language, and
have the same result. If you do use the language
argument ( , or ), you must type it in
lowercase letters as shown. The command may be in
uppercase or lowercase letters.
Method 2– Install DOS SPM with French, Spanish, or English
Language:
a. From the Windows Explorer, select the floppy drive that contains the
backup copy of SPM diskette.
b. Select and run Instal95 (either by double clicking on the file name or
single clicking on the file name and using the menu choice
File:Open).
3. After you start DOS SPM installation using either method, the following
message appears:
4. Press any key to begin the installation.