MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page3-275Print Reports
3
NOTE:NOTE:NOTE:
If you select the option, keep in mind that the reports take several
minutes to print. You may want to schedule use of the printer during
off-peak hours.
If you select a report for which there is no information, the report header still
prints.
Print reports if you cannot back up your system programming information.
Do not print reports if your system must handle more than 100 calls per hour.
If you are printing from the console, your printer must be connected to the SMDR
port. If you are programming on a PC with SPM, you have the following choices:
■Print reports on the SMDR printer (if available)
■Print reports on the PC printer
■Save reports (on hard disk or floppy)
■View reports (browse)
See Chapter 2, “Programming With SPM,” for details.
Summary: Printing System Reports 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Not applicable
Factory Setting Not applicable
Valid Entries Any saved report
Inspect No
Copy Option No
Console Procedure To print trunk information:
More→ → →Select trunk type→
To print extension information:
More→ →More→ →Dial extension no.→
→
To print all other reports:
More→ →Select report→