MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page3-67Extensions
3
Summary: Assign Trunks or Pools to Extensions 3
Programmable by System Manager
Mode All, but note differences in factory settings.
Idle Condition Extension idle
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation
Factory Setting Key Mode. An Intercom Ring (ICOM Ring) button, an
Intercom Voice (ICOM Vo ic e ) button, and the first eight lines
connected to the control unit are assigned to all analog
multiline telephones, MLX telephones (excluding operator
positions), and MFMs connected to MLX telephones. Two
Intercom Ring buttons are assigned to single-line telephones;
no outside lines are assigned.
Behind Switch Mode. Intercom Rin g, Intercom Voice, an d
prime line buttons are assigned to all analog multiline
telephones, MLX telephones (excluding operator positions),
and MFMs connected to MLX telephones. Two Intercom Ring
buttons are assigned to single-line telephones; no outside
lines are assigned. When prime lines are assigned to MLX
extensions, lines are not assigned to MFMs used to co nnect
adjuncts. Lines for MFMs must be assigned separately.
Hybrid/PBX Mode. System Access Ring (SA Ring), System
Access Voice (SA Voice), and System Access Originate Only
(SA Orig Only) buttons are assigned to all analog multiline
telephones and MLX telephones (excluding operator
positions). Five Call buttons are assigned to QCC operator
positions. Two System Access Ring buttons and one System
Access Originate Only button are assigned to single-line
telephones. No personal line or Pool buttons are assigned.
Valid Entries Extension numbers
Inspect Yes
Copy Option Yes