MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Basics
Page1-23Programming Procedures
1
Using Next 1
When you are programming a feature that can apply to a sequence of extensions,
lines/trunks, or groups, the screen key appears on the console display.
( on the PC) permits you to save your current entry and dis play the next
number in the sequence. You can continue to press until you finish
programming the entire sequence. When the last number in the sequence
displays on the screen, press ( or on the PC) to save the final
entry and move to the next step of the procedure. Procedures that allow the use of
direct you to the correct screen to continue programming as shown in Step 6
in the example below.
NOTE:NOTE:NOTE:
If you plan to take advantage of this key, remember to

enter the lowes t

number in the sequence

at the first prompt.
Specify whether the operator receives the alert.
Save your entry.
Select or
Use to program the next QCC position. Go
to Step 5.The next QCC operator will be
displayed on Line 1. After programming the last
QCC operator position, select enter and go to
Step 7.
Return to the System Programming menu.
Select twice.
xxxx
= operator entered in Step 1
Select or
.