MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-288Optional Extension Features
4
Copy Option No
Console Procedure →More→ →Dial ext. no.→
→Dial no. of delay rings→ → →
PC Procedure → → →Type ext. no.→ →
Type no. of delay rings→→→
Trunk-to-Trunk Transfer 4
Use this procedure to enable or disable trunk-to-trunk transfer at an extens ion.
When trunk-to-trunk transfer is disabled, users cannot transfer an outside call to
an outside line.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only), calls can be
transferred to members in the non-local dial plan tables, even if trunk-to-
trunk transfer is not allowed. This allows users of single-line telephones to
transfer incoming calls from the PSTN to non-local dial plan extensions.
Summary: Trunk-to-Trunk Transfer 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation
Factory Setting Disabled
Valid Entries Enabled, Disabled
Inspect Yes
Copy Option No
Console Procedure →More→More→ →
Toggle LED On/Off or dial ext. no.→ → →
PC Procedure → → →Toggle letter On/Off or type ext. no.→
→ →