MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-61Lines and Trunks
4
Console/Display Instructions Additional Information PC
Specify the line(s) associated with the QCC operator. ● ◆
● Single Line Procedure
Specify entry mode.
Select .
Enter the line/trunk assigned to ring into the QCC queue.
Assign or remove the line/trunk from the specified QCC operator.
Select or
.
You may continue to assign or remove additional
lines/trunks from the QCC operator by repeating
Steps 2 and 3.
Continue to assign line/trunk to another QCC operator or go to Step 5.
Select .
Return to Step 2. The next QCC operator
is displayed on Line 1.
xxxx
= extension number entered in Step 4
For a single line/trunk, go to
● Single Line Procedure.
For a block of lines/trunks, go to
◆ Block Procedure.
xxxx
= extension number entered in
Step 4
Dial or type:
Trunk number [
nnn
]
Slot and port number [
sspp
]
Logical ID number
#
[
nnn
]