MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-51Lines and Trunks
4
◆ Block Procedure
Console/Display Instructions Additional Information PC
Specify the block of 20 lines associated with 20 buttons on the system
programming console.
Select
Specify touch-tone or rotary signaling for each block.
Toggle the green LED on or off as required.
On = long hold disconnect interval
Off = short hold disconnect interval
Return to the System Programming menu.
Select .
Principal User for Personal Line 4
Use this procedure to assign or remove one telephone as principal user for a
personal line. When a telephone with Remote Call Forwarding activated is
assigned as principal user, calls received on the personal line are forwarded to an
outside telephone number. In addition, calls received on that line are sent to that
telephone’s individual and/or Group Coverage receivers unless the personal line
button is set to No Ring.
The principal user assignment must be removed before the trunk can be removed
from a button on the telephone.
When no principal user is assigned for a personal line, calls receive d on the
personal line are not forwarded to outside telephone numbers; calls recei ved on
the personal line follow the coverage patterns for all users who share the line.