MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page3-70Extensions
3
Console Display/Instructions Additional Information PC
Assign or remove the specified line/trunk number.
Select or
.
You may continue to assign or remove lines/
trunks by repeating Steps 2 and 3.
Assign a single line/trunk to the next extension or go to Step 5.
Select
Return to Step 2 to continue programming. The
next extension is displayed on Line 1.
Return to the System Programming menu.
Select twice.
◆ Block Procedure
Console Display/Instructions Additional Information PC
Specify the block of 20 lines associated with 20 buttons
on the system programming console.
Select
.
Assign or remove the line/trunk to or from the line button.
Toggle the green LEDs next to each
line button on or off as required.
On = line/trunk or pool assigned to extension
Off = line/trunk or pool not assigned to extension
For Hybrid/PBX only:
The red LED indicates:
On = trunk assigned to pool
Off = trunk not assigned to pool
Save your entry.
Select .