MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-36Lines and Trunks
4
◆ Block Procedure
Console/Display Instructions Additional Information PC
Specify the block of 20 lines associated with 20 buttons on the system
programming console.
Select
Specify touch-tone or rotary signaling for each block.
Toggle the green LED on or off as required.
On = touch-tone
Off = rotary
Return to the System Programming menu.
Select three times.
Rotary Trunk Digit Transfer 4
Use this procedure to designate whether dialed digits on rotary-dial lines/trunks
are sent one by one as they are dialed (no delay), or are stored and sent when
dialing is completed (delay). Contact your service provider for more information
about the appropriate setting.
Summary: Rotary Trunk Digit Transfer 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 8a, System Features
Factory Setting No Delay
Valid Entries Delay, No Delay
Inspect No
Copy Option No
Console Procedure →More→ →Select option→ →
PC Procedure → → →Select option→ →