MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-383Automatic Route Selection
4
NOTES:
1. Pool routes must be programmed before you assign digit absorpt ion.
2. In Release 6.0 and la ter systems where remote users will dial out via
networked lines, absorbed digits are often useful. For example, if remote
callers are in the 908 area code but your system is in the 617 area code,
callers might dial , where is the remote ARS access
code. Because the call is a local call on the remote system, the
absorbed digits on that system would be .
Summary: Digit Absorption 4
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 3f, Automatic Route Selection Tables
Factory Setting 0
Valid Entries 0 to 11
Inspect No
Copy Option No
Console Procedure → → or More and →
Dial table no. and pool route no.→ →Drop→Dial no. of
digits to absorb→ → →
PC Procedure → → or and →Type table no. and pool
route no.→ → + →Type no. of digits to absorb→
→ →
Procedure: Digit Absorption 4
Console/Display Instructions Additional Information PC
Select the Tables menu.