MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-438Integrated Administration
4
Table 4–6. Programming through Integrated Administration
The information programmed through Integrated Administration is shared with the
communications system control unit. The information does not have to be
programmed again when you program the communications system.
If extension numbering is changed on the switch (using the MLX-20L console or
SPM), the switch and the application database will no longer be in agreem ent. To
reduce the chance that such changes will disrupt communication b etween the
switch and the application(s), Integrated Administration includes an automatic
reconciliation program that runs every day at 3:00 a.m. The program compares
the application database to the switch programming and brings the two into
agreement. The program makes changes, as necessary, only to the application
database, according to the rules listed in Table 4–7. The reconciliation program
does not change the switch programming.
In a Release 2.0 or earlier system with Integrated Solution III Version 1.0 or 1.1,
use the System Renumbering feature cautiously. When this feature is used, all
messages and greetings for users that have been renumbered are erased from
AUDIX Voice Power when the automatic reconciliation program runs at 3:00 a.m.
NOTE:NOTE:NOTE:
The reconciliation program is disabled in IS III Version 1.2.
Option Factory Setting Range
Automated Attendant Calling Group 770
Call Answer Calling Group 7926
FAX Response Calling Group 7924
Information Service Calling Group 7927
Message Drop Calling Group 7928
Voice Mail Calling Group 7925
Coverage Group 30 1 to 30
Reliable Disconnect yes
Delay Ring 2 rings 1 to 6 rings
Coverage Delay Ring 3 rings 1 to 9 rings
VMS Transfer Return Interval 6 rings 0 to 9 rings
Transfer Return Time 6 rings 0 to 9 rings