Lucent Technologies 6.0 Primary Cover Ring Delay 3, Summary: Primary Cover Ring Delay 3

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page3-126Optional Extension Features
3
Primary Cover Ring Delay 3
The Primary Cover Ring Delay option replaces the Delay Ring Interval
programmed on a systemwide basis in releases prior to Release 4.1.
Use this procedure to specify the following:
■The delay before a Primary Cover button programmed for Delay Ring
begins to ring audibly
■The delay in addition to the Group Coverage Ring Delay before s ending
calls to Group Coverage when the sender has Primary or Secondary
Coverage
and any receiver is available
The Primary Cover Ring Delay is programmed for each sender’s extension.
Summary: Primary Cover Ring Delay 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Factory Setting 2 rings
Valid Entries 1–6 rings
Inspect No
Copy Option No
Console Procedure →More→More→ → →
Dial sender’s extension→ →Dial no. of rings (1–6)→
→
PC Procedure → → → → →Type sender’s
extension→ →Type no. of rings (1–6)→ →