Lucent Technologies 6.0 + or or Type no. of calls

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page4-313Optional Group Calling Features
4
Summary: Group Calling Calls-In-Queue Alarm
Threshold 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Settings 1 call, for all Thresholds
Valid Entries 1 to 99
Inspect No
Copy Option No
Console Procedure →More→ → →
Dial calling group ext. no.→ → or
or →Drop→
Dial no. of calls→ → →
PC Procedure → → → →Type calling group ext. no.→
→ + →or or →Type no. of calls→
→ →
Group Calling External Alert for
Calls-In-Queue Alarm 4
Use this procedure to designate the external alert de vice used to notify calling
group members when the number of calls in the queue reaches programmed
Threshold 3.
Only one external alert device can be designated for each calling group. Since the
external alert signal is continuous, it is recommended that only light-type external
alert devices be designated for the Calls-in-Queue alarm.
Summary: Group Calling External Alert for
Calls-In-Queue Alarm 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting Not applicable
Valid Entries Extension number