MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-59Lines and Trunks
4
Summary: QCC Operator to Receive Calls 4
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 2c, System Numbering: Line/Trunk Jacks
Factory Setting No QCC operator is assigned to receive calls.
Valid Entries Extension number of first or fifth extension jack
Inspect Yes
Copy Option No
Console Procedure To program a single line/trunk:
→More→ →Dial ext. no.→
→Select entry mode→Dial line/trunk no.→
→ →
To program a block of lines/trunks:
→More→ →Dial ext. no.→
→Select block of lines/trunks→Toggle LED On/Off→
→ →
PC Procedure To program a single line/trunk:
→ → →Type ext. no.→→→
Type line/trunk no.→→→
To program a block of lines/trunks:
→ → →Type ext. no.→ → Select block of
lines/trunks→Toggle letter On/Off→→→
Procedure: QCC Operator to Receive Calls 4
Console Display/Instructions Additional Information PC
Select the Lines and Trunks menu.