MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-415UDP (Uniform Dial Plan) Routing
4
Console/Display Instructions Additional Information PC
Continue to specify other digits for another route in the current pattern or go to
Step 11.
Select .
Return to Step 8. The next route number
is displayed on Line 1.
Save your entry.
Select .
Return to the System Programming menu.
Select four times.
UDP Voice and/or Data Routing 4
Use this procedure to route voice, data, or voice and data. For UDP routing, the
voice/data specification is used in conjunction with PRI tandem trunks (see “PRI
Facilities” on page 4–165 for more information). When using Fractional-T1
tandem trunks, each channel on the trunk can be used for either voice or data but
not for voice/data (see “DS1 Facilities” on page 4–87 for more information).
Voice/data routes can be associated with any UDP pattern.
Summary: UDP Voice and/or Data Routing 4
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Non-Local Dial Plan Administration Form in the Installation
Specification
Factory Setting Voice/Data
Valid Entries Voice Only, Data Only, Voice/Data
Inspect No
Copy Option No
Console Procedure → →Dial pattern no.→ →
Dial route no.→ → →Select capability→→
→→ →
PC Procedure → →Type pattern no.→ →Type route no.→
→ →Select capability→→→→→