Lucent Technologies 6.0 Summary: Select System Numbering Plan 4, Procedure: Select System Numbering Plan 4

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Programming Procedures
Page4-18System Renumbering
4
Summary: Select System Numbering Plan 4
Programmable by System Manager
Mode All
Idle Condition System idle
Planning Form Form 2a, System Numbering: Extension Jacks
Factory Setting Two-digit
Valid Entries Two-digit, Three-digit, Set Up Space
Inspect No
Copy Option No
Console Procedure → →
Select numbering plan→ →
PC Procedure → →Select nu mbering plan→ →
Procedure: Select System Numbering Plan 4
Console Display/Instructions Additional Information PC
Select the System Renumbering menu.
Select Default Numbering.
If you get the System Busy message,
wait for an idle condition or exit system
programming and try again later.