MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-345Remote Access Features
4
Console Display/Instructions Additional Information PC
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
Remote Access without Bar rier Codes 4
Use this procedure to change the class of restriction for one of the following:
■All non-tie lines/trunks
■All tie trunks and DID trunks with Remote Access
■DID remote access code
!SECURITY ALERT:

Your system will be highly susceptib le to toll fraud if you activate the Remote

Access feature without barrier codes. Lucent Technologies does not

recommend doing this except in cases where your remote-access trunks

are being used by external users connected to a system that is in a private

network with your own (Release 6.0 and later). Even in these cases, the lack

of barrier code poses a risk of toll fraud. Be sure that the remote system

manager assigns any necessary restrictions.

NOTE:NOTE:NOTE:
If barrier code requirements have been established for remote access
users, use “Remote Access with Barrier Codes” on page –357 and not this
procedure.
The class of restriction assigned may be one of the following:
■Restriction. Determines whether remote access users can make local
and/or toll calls and includes the following settings:
— Unrestricted
— Toll restricted
— Outward restricted