MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-160DID Trunks
4
Console Display/Instructions Additional Information PC
Erase the current number of added digits (
nnn
).
Enter the number of digit s to add (
n
= 1 to 9999).
Dial or type [
n
].
Continue to specify added digits for the other trunk block or go to Step 9.
Select .
Return to Step 6. The next block is
displayed on Line 1.
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
Signaling 4
Use this procedure to specify whether the type of dialing signal from the local
telephone company is touch-tone or rotary. Touch-tone dial mode cannot be
programmed for immediate-start DID trunks.
Touch-tone single-line telephone users cannot make calls by using individual
trunks programmed for rotary operation. The touch-tone signals generated from
the telephone while dialing are transmitted to the central office at the same time
the rotary signals are sent to the system. The central office receives both signals
and cannot process the call.
x
= block entered in Step 4
Press Drop.