Lucent Technologies 6.0 Automatic Hold or Release 3, Summary: Automatic Hold or Release 3, Procedure: Automatic Hold o r Release 3

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page3-38QCC Optional Features
3
Console Display/Instructions Additional Information PC
Return to the System Programming menu.
Select twice.
Automatic Hold or Release 3
Use this procedure to specify whether a call in progress (on a Call button) i s
automatically put on hold (Automatic Hold) or disconnected (Automatic Release)
when the operator presses another button.
This option cannot be programmed for individual QCC operator positions. The
single setting applies to all QCC operator positions.
Summary: Automatic Hold or Release 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 6a, Optional Operator Features
Factory Setting Automatic Release
Valid Entries Auto Hold, Auto Release
Inspect No
Copy Option No
Console Procedure → → → or
→ → →
PC Procedure → → → or →→→
Procedure: Automatic Hold o r Release 3
Console Display/Instructions Additional Information PC
Select the Operator menu.