Lucent Technologies 6.0 Line Compensation 4

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Programming Procedures
Page4-116DS1 Facilities
4
Console/Display Instructions Additional Information PC
Save your entry.
Select .
Select Signaling.
Select the type of signaling.
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
Line Compensation 4
Use this procedure to specify the amount of cable loss in decibels. Cable loss is
based on the length of cable between the 100D module and the Channel Service
Unit, as shown below:
■1 = 0.6 dB loss
■2 = 1.2 dB loss
■3 = 1.8 dB loss
■4 = 2.4 dB loss
■5 = 3.0 dB loss
xx = slot number entered in Step 3
xx = slot number entered in Step 3
is used for tandem PRI
trunks.
Select or
.