MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Basics
Page1-45Access to System Programming fromthe MLX-20L Console
1
System Programming Menu 1
Figure 1–11 shows the two screens that make up the System Programming menu.
Table 1–3 describes the options.
Table 1–3. System Programming Menu Options
Option Description
System Set system operating conditions.
SysRenumber Select the system numbering plan and/or reassign e xtension
numbers with 1- to 4-digit numbers that are more appropriate
or convenient for your company.
Operator Assign or remove operator positions and program operator
features (such as Operator Hold Timer or QCC options).
LinesTrunks Program line/trunk options.
Extensions Program extension features such as line assignments.
Options Program systemwide features (such as Transfer Return).
Table s Program features that require entering information in a table
(such as Allowed Lists and Disallowed Lists).
AuxEquip Program auxiliary equipment connected to the system (such
as loudspeaker paging and fax).
NightSrvce Program Night Service features.
Labeling Program the labels shown on display telephones (such as
entries in the System Directory and Posted Messages).
Data Specify extensions that need voice and data capability.
Print Print system programming reports (such as system
configuration and extension assignments).
Cntrl-Prog Perform centralized telephone programming (assign features
to specific buttons on telephones).
Language Select the language of the system, MLX display telephones,
SMDR reports, and print reports.