MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-121Tie Trunks
4
Console/Display Instructions Additional Information PC
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
Tie Trunks 4
This section covers programming procedures for the following tie trunk options:
■Direction
■Tie Trunk Seizure Type
■E&M Signal
■Dial Mode
■Tie Trunk Dial Tone
■Tie Trunk Answer Supervision Time
■Disconnect Time
See the

Equipment and Operations Reference

for additional information on tie
trunks.

Direction 4

Use this procedure to specify whether tie trunks operate in a one- or two-way
direction. For one-way tie trunks, you must also specify whether the direction is
out or in.

Summary: Direction 4

Programmable by System Manager
Mode All
Idle Condition Tie trunk idle
Planning Form Form 3c, Incoming Trunks: Tie
Factory Setting Two-way
Valid Entries Two-way, Outgoing, Incoming
Inspect No