MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming with SPM
Page2-57Upgrading the System
2
Upgrading the System 2
!WARNI NG:

The following procedures are to be used by qualified technicians or service

personnel only. Installation or maintenance of this product by anyone other

than qualified personnel may damage or impair the pro duct; your limited

warranty does not cover such damage. For details, see your limited

warranty in the Customer Support Information in the back of this boo k.

Hazardous electrical voltages are present inside this product.

This section describes upgrading your communications system to Release 6.0.
You can use this procedure to perform the following upgrades:
■From Release 1.0 to Release 6.0
■From Release 1.1 to Release 6.0
■From Release 2.0 to Release 6.0
■From Release 2.1 to Release 6.0
■From Release 3.0 to Release 6.0
■From Release 3.1 to Release 6.0
■From Release 4.0 to Release 6.0
■From Release 4.1 to Release 6.0
■From Release 4.2 to Release 6.0
■From Release 5.0 to Release 6.0
MERLIN II Communications System programming cannot be upgraded to this
communications system. The new communications system must be completely
reprogrammed.