MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-197PRI Facilities
4
Console Display/Instructions Additional Information PC
Erase the current test telephone number (
N
).
Enter a telephone number of up to 12 digits to be as signed as
the test number to the 100D module (
N
= any combination of 0 to 9).
Dial or type [
N
].
Continue to assign the test telephone number to another
100D module or go to Step 9.
Select .
Return to Step 6. The next slot is
displayed on Line 1.
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
Timers and Counters 4
Use this procedure to set timer and counter thresholds.
!CAUTION:
!CAUTION:
The factory settings for these thresholds are standard and rarely need to be
changed. If you are not sure of the correct timer and threshold settings for
your PRI lines and trunks, check with your Lucent Technologies
representative before you make a change. Incorrect settings can cause
your PRI lines and trunks to malfunction.
xx
= number entered in Step 4
Press Drop.