MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-453Memory Card
4
Board Mismatch 4
A mismatch exists between the hardware components present on the current
system and the hardware components reflected in the backup file. The restore is
aborted. You can do one of the following:
■Repeat the restore procedure with another file.
■Modify the system hardware to match the configuration of the backup file
and repeat the restore procedure with the same file.
Strap in Place for Key Mode but Mode is Set to Hybrid 4
!CAUTION:

This procedure should be performed only by qualified service

personnel.

If the processor module has been set for Permanent Key mode, a restore to
Hybrid/PBX mode is not possible. A service associate must be notified in order to
modify the processor.
n
= filename selected
n
= filename selected