MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-370Automatic Route Selection
4
Console/Display Instructions Additional Information PC
Erase the current entry (
nnn
).
Enter an area code or exchange of up to 3 digits (0 to 9) to include in the table.
Dial or type [
nnn
].
Continue to enter area code or exchange for another table entry number or go
to Step 13.
Select .
Return to Step 10. The next table is
displayed on Line 1.
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
Start and Stop Times for Subpatterns 4
Use this procedure to specify the time of day that calls are routed using
Subpattern B routing information.
Subpatterns are used to provide two different routing patterns according to the
time of day. This allows you to take advantage of lower rates that may apply to
some or all lines, or to change restrictions on some facilities during off hours.
The stop time for Subpattern B is the start time for Subpattern A.
Enter the time in 4-digit, 24-hour notation, and use leading zeros as necessary.
xx
= table number entered in Step 4
xxx
= entry number entered in Step 8
Press Drop. +