MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-314Optional Group Calling Features
4
Inspect No
Copy Option No
Console Procedure →More→ → →
Dial calling group ext. no.→ →Drop→Dial ext. no. for
alert→ → →
PC Procedure → → → →Type calling group ext. no.→
→ + →Type ext. no. for alert→→→

Group Type 4

Use this procedure to determine whether or not the system automatically logs in
members of a calling group after a power failure. This setting also determines the
type of voice messaging interface when the calling group is used to connect voice
messaging or automated attendant applications. The settings are listed below.
■Automatic Log Out. Used for calling groups to specify that the system
does not automatically log in calling group members after a power failure.
Calling group members must manually log themselves into the group.
■Automatic Log In. Used for calling groups that consist of fax machines or
data workstations (also called data hunt groups) to specify that the system
automatically logs in calling grou p mem bers after a power failure. This
setting can also be used for calling groups consisting of telephones.
■Integrated VMI. Used when a voice messaging system that requires
special signaling for integrated operation (for example, AUDIX Voice
Power, IS II/III, or MERLIN MAIL Voice Messaging System) is connected to
one or more extension jacks assigned to a calling group. The system
automatically logs in the group members after a power failure.
■Generic VMI. Used when a voice messaging system that does not need
special signaling is connected to one or more extension jacks assigned to a
calling group. The system automatically logs in the group members after a
power failure.

Summary: Group Type 4

Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting Automatic Log Out
Valid Entries Automatic log in, Automatic log out, Integrated VMI,
Generic VMI
Inspect No